Plastomatic - Solenoid Valves

Features:

• PTFE Bellows barrier-type dynamic seal prevents leaking of fugitive emissions to the atmosphere
• Over 2 million cycles in laboratory conditions
• Rugged thermoplastic construction is resistant to both internal and atmospheric corrosion
• All valves individually inspected and 100% tested to insure reliable operation

Specifications

• Max temperature: 122°F
• Max pressure: 140 PSI
• Voltage Tolerance: 10% above or below rated voltage
• Enclosure Rating: IP65

Features:

• Coil Connector Light: Indicates when valve is energized
• Over 2 million cycles in laboratory conditions
• Rugged thermoplastic construction is resistant to both internal and atmospheric corrosion
• All valves individually inspected and 100% tested to insure reliable operation

Specifications

• Max temperature: 140 PSI
• Max Watts: 24 (watts drop to approx. 6 watts after initially energized)
• DIN Connection 1/2" NPT
• Wire Leads: 18"

Features:

• Normally closed, in-line design with bubble-tight shut-off
• Positive valve closure in the event of electrical failure
• Can be used with all types of solutions including acids, caustics, solvents and chlorine solutions
• Energy-efficient 11 watt coil

Specifications

• Max pressure: 140 PSI
• Minimum 5 PSI differential required
• Voltage tolerances:Voltage tolerances +10%, -15% @ 104°F.
• Max temperature: 140°F

Features:

• Superior Performance: 2,000,000 cycle design
• Corrosion Resistant: Rugged thermoplastic construction is resistant to both internal and atmospheric corrosion
• Energy Efficient: Molded 11 watt NEMA 4X style coil with DIN standard connector results in low energy consumption
• Low unit cost coupled with high pressure ratings and considerable flow rates

Specifications

• Max pressure: 140 PSI
• Max temperature: 284°F
• Standard voltages are 110/50, 220/50, 120/60, 230/50, 240/60 AC and 24 VDC
• NEMA 4X style coil

Features:

Specifications

Features:

Specifications

Applications

Specifications