📞 +1 877-742-2878
FINISH THOMPSON SP SERIES SELF-PRIMING MAG DRIVE PUMPS
Finish Thompson SP Series Magnetic Drive Self-Priming Centrifugal Pumps offer significant energy savings with their highly efficient pump design. These seal-less centrifugal pumps are designed with a powerful inlet vacuum allowing up to a 25-foot lift in just over 90 seconds! You can count on leak-free service from SP pumps due to their molded, one-piece priming chamber which is far superior to other two-piece, gasket designs. Every Finish Thompson SP self-priming pump is backed by a 5-YEAR Manufacturer’s Warranty.
Features
- Provides up to 25 ft. (7.6 m) lift or equivalent
- Primes 15 ft. (4.57 m) in 90 seconds with maximum diameter impeller
- Retains fluid for re-priming when shut off without a check valve
- Extended run dry ability
- High operating efficiency
- Polypropylene or PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Threaded (NPT or BSP), union, or flange connections
- Back pullout design
- Mounts to NEMA and IEC (B5 & B14) motor frames
- Easy set measurement free drive
- ISO 1940 G2.5 balancing
- CE certified
- High working pressure up to 80 psi (5.5 bar)
- Specific gravity over 1.8
Buy Now
Applications
- Rail cars
- Tanker trucks
- Tanks with an opening on top
- Bulk storage to day or process tank transfer
- Sumps and reservoirs
- Below grade storage tanks
- Over-the-wall applications
- When run-dry protection is needed
Features
- Provides up to 25 ft. (7.6 m) lift or equivalent
- Primes 18 ft. (5.5 m) in 90 seconds with maximum diameter impeller
- Retains fluid for re-priming when shut off without a check valve
- Extended run dry ability (with carbon bushing)
- High operating efficiency
- Polypropylene or PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Threaded (NPT or BSP), union or flange connections
- Back pullout design
- Mounts to NEMA and (B5 & B14) IEC motor frames
- Easy set measurement free drive
- ISO 1940 G2.5 balancing
- CE certified
- High working pressure up to 90 psi (6.2 bar)
- Specific gravity over 1.8
Buy Now
Applications
- Rail cars
- Tanker trucks
- Tanks with an opening on top
- Bulk storage to day or process tank transfer
- Sumps and reservoirs
- Below grade storage tanks
- Over-the-wall applications
- When run-dry protection is needed
Features
- Provides up to 25 ft. (7.6 m) lift or equivalent
- Primes 18 ft. (5.5 m) in 90 seconds with maximum diameter impeller
- Retains fluid for re-priming when shut off without a check valve
- Extended run dry ability (with carbon bushing)
- High operating efficiency
- Polypropylene or PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Threaded (NPT or BSP), union or flange connections
- Back pullout design
- Mounts to NEMA and (B5 & B14) IEC motor frames
- Easy set measurement free drive
- ISO 1940 G2.5 balancing
- CE certified
- High working pressure up to 90 psi (6.2 bar)
- Specific gravity over 1.8
Buy Now
Applications
- Rail cars
- Tanker trucks
- Tanks with an opening on top
- Bulk storage to day or process tank transfer
- Sumps and reservoirs
- Below grade storage tanks
- Over-the-wall applications
- When run-dry protection is needed
Features
- Provides up to 25 ft. (7.6 m) lift or equivalent
- Primes 15 ft. (4.57 m) in 90 seconds with maximum diameter impeller at 60 Hz with 3” pipe
- Retains fluid for re-priming when shut off without a check valve
- Extended run dry ability (with carbon bushing)
- High operating efficiency
- Polypropylene or PVDF construction
- Powerful neodymium magnets
- Close-coupled design
- Threaded (NPT or BSP), union or flange connections
- Impeller trims available every 1/8” (.32 cm) between smallest and largest diameter
- Back pullout design
- Mounts to NEMA and IEC (B5 & B14) motor frames
- Easy set measurement free drive
- ISO 1940 G2.5 balancing
- CE certified
- High working pressure up to 90 psi (6.2 bar)
- Specific gravity over 1.8
Ask Now
Applications
- Rail cars
- Tanker trucks
- Tanks with an opening on top
- Sumps and reservoirs
- Below grade storage tanks
- Over-the-wall applications
- When run-dry protection is needed
