📞 +1 877-742-2878
FINISH THOMPSON GP SERIES SEALED PUMPS
Engineers choose the GP Series of Finish Thompson centrifugal pumps when they are looking for reliable service in corrosive environments. These pumps are designed and built with rugged non-metallic wetted components, making them ideal for pumping aggressive chemicals. This series of FTI centrifugal pumps are available with bellows, multi-spring, or mechanical seals, offering a long-lasting economical pump to meet even the most challenging pump applications.
Features
- Mechanical seal horizontal centrifugal pump
- GF Polypropylene or CF PVDF construction
- NPT, BSP, or flanged connections
- Accepts standard NEMA or IEC motor frames
- Up to 7 1/2 Hp (3.0 kW) motors
- Back pull-out feature enables fast access for maintenance
- Close coupled or pedestal mounted
- Bellows, multi-spring or double seals
- Carbon, FKM or ceramic standard seal materials
- FKM or EPDM o-rings standard
- Over 1.8 specific gravity with no impeller trimming
- Port sizes: 1.5” x 1.5”, 2” x 2”, 3” x 2”
- Maximum temperature: Polypropylene - 180° F (82° C), PVDF - - 220° F (104° C)
- Maximum working pressure: 35 psi / 2.4 Bar (GP11), 55 psi / 3.8 Bar (GP22/32)
Ask Now
Applications
- Chemical processing, spraying, transfer
- Plating recirculation/filtration, PCB etching/rinse
- Mild corrosive or low budget applications where periodic seal replacement is not an issue
Features
- Mechanical seal horizontal centrifugal pump
- GF Polypropylene or CF PVDF construction
- NPT, BSP, or flanged connections
- Accepts standard NEMA or IEC motor frames
- Up to 7 1/2 Hp (3.0 kW) motors
- Back pull-out feature enables fast access for maintenance
- Close coupled or pedestal mounted
- Bellows, multi-spring or double seals
- Carbon, FKM or ceramic standard seal materials
- FKM or EPDM o-rings standard
- Over 1.8 specific gravity with no impeller trimming
- Port sizes: 1.5” x 1.5”, 2” x 2”, 3” x 2”
- Maximum temperature: Polypropylene - 180° F (82° C), PVDF - - 220° F (104° C)
- Maximum working pressure: 35 psi / 2.4 Bar (GP11), 55 psi / 3.8 Bar (GP22/32)
Ask Now
Applications
- Chemical processing, spraying, transfer
- Plating recirculation/filtration, PCB etching/rinse
- Mild corrosive or low budget applications where periodic seal replacement is not an issue
Features
- Mechanical seal horizontal centrifugal pump
- GF Polypropylene or CF PVDF construction
- NPT, BSP, or flanged connections
- Accepts standard NEMA or IEC motor frames
- Up to 7 1/2 Hp (3.0 kW) motors
- Back pull-out feature enables fast access for maintenance
- Close coupled or pedestal mounted
- Bellows, multi-spring or double seals
- Carbon, FKM or ceramic standard seal materials
- FKM or EPDM o-rings standard
- Over 1.8 specific gravity with no impeller trimming
- Port sizes: 1.5” x 1.5”, 2” x 2”, 3” x 2”
- Maximum temperature: Polypropylene - 180° F (82° C), PVDF - - 220° F (104° C)
- Maximum working pressure: 35 psi / 2.4 Bar (GP11), 55 psi / 3.8 Bar (GP22/32)
Ask Now
Applications
- Chemical processing, spraying, transfer
- Plating recirculation/filtration, PCB etching/rinse
- Mild corrosive or low budget applications where periodic seal replacement is not an issue
