PolymerPlus 6012PS-SX Polymer Feed Skid 102PS

The PolymerPlus activation chamber uses a patented hydrodynamic activating system. It does not use a motor with a mixing chamber.  The apparatus automatically compensates for solution flow changes.  This assures that the polymer activation energy level remains adequate for the flow range of the feeder. A peristaltic type neat polymer pump with local or remote pump speed control. The pump is programmable with remote 4-20 mA signal. An external polymer injection valve is accessible without disturbing the mixing apparatus. The valve spring is made of Hastelloy-C to minimize the possibility of stress corrosion cracking. A flowmeter, with a brass water valve, allows adjusting the flow as desired. A switch monitors dilution water flow.  It turns off the pump whenever the flow is interrupted.  The pump restarts when water flow resumes. Light provides a local indication that water flow has been interrupted. A set of dry contacts close to allow remote monitoring. A solenoid-operated valve turns the water flow on-off. An H-O-A switch allows local or remote Start-Stop control. The remote run switch is to be a dry contact. The feeder provides the 120 VAC to power the circuit. The sight glass is self-cleaning.  The patented assembly allows the operator to see how the feeder is operating. The system is built on a stainless steel frame. Required utilities:  Water pressure; 30 to 50 psi.  Pressure must be at least 30 psi higher than the solution injection point pressure. Electrical power; 120 VAC, 3 amps. (Metering Pump feed rate & dilution water information to be provided per model). Polymer Feed Systems are used for the following wastewater treatment applications:

• Sludge Dewatering
• Water Clarification
• Water Reuse
• Water Recycle
• Oil & Gas Removal
• Emulsion Breaking
• Paint detackification
• Coagulation & Flocculation
• Dissolved Air Flotation