📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Weight (lbs) | 5 |
---|
Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.
March Pump's industrial 815-PL is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 7 gallons per minute at 5 feet, and its maximum head is 18.6 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius. To determine if the March 815-PL is suitable for your application, please contact March Pump.
Applications for the 815-PL Magnetic Drive Pump include hot water systems, solar heating, and fryers.
The 815-PL has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water. The 815-PL may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 815-PL for any of the above listed chemicals.
Brand | March |
---|---|
Product Type | Pump |
Application | Beer Pump |
Inlet/Outlet Connection Type | MPT |
Inlet Size | 1/2 in |
Motor Hz Rating | 50/60 |
Motor Voltage | 115 VAC |
Outlet Size | 1/2 in |
Max Flow | 7 gpm (26.5 lpm) |
Max Head | 18.6 ft / 4.1 m |
Material - Wet End | Polysulfone |
Max Head Range | 16 - 30 ft |