📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Weight (lbs) | 6.25 |
---|
Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.
March Pump's industrial BC-2AP-MD is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 5 gallons per minute at 2 feet, and its maximum head is 13 Feet (or around 5.5PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, and Ceramic. The inlet connection is 0.75 inch smooth, and the outlet is 0.5 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.025 Horsepower blast cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March BC-2AP-MD centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents. To determine if the March BC-2AP-MD is suitable for your application, please contact March Pump.
Housings: Polypropylene or Delrin
O-Ring: Buna N, Viton, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Impeller: Polypropylene or Delrin
Applications for the BC-2AP-MD Mag Drive include etching equipment, photographic processing equipment, ice flakers, plate processors, and marine air conditioners .
The BC-2AP-MD has pumped Acetic Acid, Citric Acid, Ethylene Glycol, Formaldehyde, Hydrochloric Acid (Muriatic), Nitric Acid, Phosphoric Acid, Potassium Chloride, Potassium Hydroxide, Sodium Hydroxide (Caustic Soda), Sodium Chloride, Sulfuric Acid, Fresh Water, Salt Water, DI Water, and many more chemicals. The BC-2AP-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the BC-2AP-MD for any of the above listed chemicals.
Brand | March |
---|---|
Product Type | Pump |
Pump Application | Beer Pump |
Inlet/Outlet Connection Type | OD |
Inlet Size | 3/4 in |
Motor Hz Rating | 50/60 |
Motor Voltage | 230 VAC |
Outlet Size | 1/2 in |
Max Flow | 5 gpm (18.9 lpm) |
Max Head | 13 ft / 2.7 m |
Submersible | No |
Material - Wet End | Polypropylene |
Max Head Range | < 15 ft |