March 2CP-MD 115 VAC Magnetic Drive Centrifugal Pump 0125-0058-0100

Liters per minute (LPM) and Meters (M) are given when run at 50HZ, except when pump is equipped with Air or DC motors.

March Pump's industrial 2CP-MD is an American submersible seal-less centrifugal magnetic drive pump. It is capable of generating a maximum flow of 5 gallons per minute at 1 foot, and its maximum head is 13 Feet (or around 5.5PSI). The 2CP-MD pump must be used submerged. The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Viton, Stainless Steel, Ceramic, and Ceramic Magnet. When submerged, Epoxy, Buna N, and the Cord are also in contact with the solution. The inlet connection is 0.375 inch female pipe thread and 0.75 inch male pipe thread, and the outlet is 0.25 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.028 Horsepower motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 130 Fahrenheit or 54 Celsius. The March 2CP-MD centrifugal magnetic drive pump is capable of handling fresh water, salt water, and mild chemicals. To determine if the March 2CP-MD is suitable for your application, please contact March Pump.

O-Ring: Buna N, Viton, or Ethylene Propylene
Shaft: Ceramic or 316 Stainless Steel
Impeller: Polypropylene or Delrin

The most common application for the 2CP-MD Magnetic Drive Pump is for marine air conditioning and fountains.

The 2CP-MD has pumped Fresh Water and Salt Water. The 2CP-MD may have been modified to handle these chemicals. Please contact March Pump to review your application before using the 2CP-MD for any of the above listed chemicals.