📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Notes | Lmi Series B Metering Pump, 4.5 GPH @ 50 Psi, 115 Vac, (high Viscosity) |
---|---|
Weight (lbs) | 15 |
General Description
LMI Series B chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 29 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 15 lbs (6.9 kg).
Pressure Relief
To eliminate need for pressure relief valve, Liquifram shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.
Materials of Construction
Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve / Tubing Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections).
Brand | LMI |
---|---|
Product Type | Pump |
Material - Diaphragm | Fluorofilm |
Inlet/Outlet Connection Type | Tube |
Inlet Size | 1/2 in |
Material - Oring | FKM |
Motor Hz Rating | 50/60 |
Motor Voltage | 115 VAC |
Outlet Size | 15/16 in |
Material - Balls | 316 Stainless Steel |
Max Flow | 4.5 gph |
Max Pressure | 50 |
Pump Type | Metering Pump, Diaphragm, Solenoid |
Turndown Ratio | 600:01:00 |
Max Viscosity | 40000 |
Includes | External Control Cable, Tubing, 1/2" NPT Male Injection Check/Back Pressure Valve, and Instruction Manual |
Speed | 100 spm |
Flow Control | 4-20 mA Input or pulse divide or multiply with Dual Manual Control |
Head Fittings | Molded Acrylic/PP |
Connection | Tubing PE .5" OD/Vinyl .938" OD |
Max Strokes per Minute | 100 |
Material - Dosing Head & Fittings | Molded Acrylic/PP |
Notes | Lmi Series B Metering Pump, 4.5 GPH @ 50 Psi, 115 Vac, (high Viscosity) |
Displacement | Positive Displacement |