Product images shown are for illustration purposes only
and may not be an exact representation.
| Notes | B713-D98HM Series B Chemical Metering Pump, 1.6 GPH, 150 psi (10.3 Bar) Max PSI, 50/60 Hz, 220-240V AC, DIN Plug Volt, Pulse Input with Dual Manual Control, PVC/PVC, Ceramic Valve Balls, Fluorofilm &t |
|---|---|
| Weight (lbs) | 15 |
- OVERVIEW
- SPECIFICATIONS
- DOCUMENTS
- DOCUMENTATION
- PARTS / ACCESSORIES / KITS
- RELATED PRODUCTS
- REVIEWS
- VIDEO
- B Series Information
General Description
LMI Series B chemical metering pumps shall be positive displacement, Liquifram type pumps that are UL and CUL approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity.
Pump Controls
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 29 watts per hour under full speed and maximum pressure conditions. Pump weight shall not exceed 15 lbs (6.9 kg).
Pressure Relief
To eliminate need for pressure relief valve, Liquifram shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.
Materials of Construction
Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Valve seat and seal ring shall be renewable by replacing only the combination seat-seal ring or cartridge valve assembly.
Check Valve / Tubing Connections
A total of 16 ft (4.8 m) of tubing shall be provided per pump complete with compressing connections (on models with tubing connections). A foot valve with integral one piece strainer shall be provided for the suction line (on non-high viscosity models with tubing connections), and an injection check/back pressure valve with 1/2" NPT male connection for the injection point (on models with tubing connections).
Brand LMI Product Type Pump Material - Diaphragm Fluorofilm Motor Hz Rating 50/60 Motor Voltage 120 VAC Material - Balls .375 Ceramic Max Flow 7 gph Max Pressure 30 psi (2.07 Bar) Turndown Ratio 600:01:00 Flow Control Dual Manual Control Connection PE .5" OD Max Strokes per Minute 100 Material - Dosing Head & Fittings PVDF/PVDF Notes B713-D98HM Series B Chemical Metering Pump, 1.6 GPH, 150 psi (10.3 Bar) Max PSI, 50/60 Hz, 220-240V AC, DIN Plug Volt, Pulse Input with Dual Manual Control, PVC/PVC, Ceramic Valve Balls, Fluorofilm &t Displacement Positive Displacement