📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
| Weight (lbs) | 53.2 |
|---|
- OVERVIEW
- SPECIFICATIONS
- DOCUMENTS
- DOCUMENTATION
- PARTS / ACCESSORIES / KITS
- RELATED PRODUCTS
- REVIEWS
- VIDEO
The DME is the original Digital Dosing™ pump that represents a major step forward in metering pump technology. Precise and easy setting - The operator can easily install and set the pump to discharge exactly the quantity of dosing liquid required in the application. Capacity is read on the digital display in GPH, l/h, or ml/h, while icons are used to identify the operation mode.
Unique technology - A microprocessor controlled variable speed brushless DC motor provides precise control of the suction and discharge strokes. This improves handling of viscous fluids and chemicals that off-gas. Rather than traditional stroke length adjustments, the DME always runs at 100 % stroke length. Feed rates are adjusted by controlling the speed of the discharge stroke with a fixed suction stroke speed, resulting in near continuous output as the pump is turned down.
Brand Grundfos Product Type Pump Drive Type Gear Material - Diaphragm Fabric-Reinforced EPDM, PTFE-Coated Inlet/Outlet Connection Type NPT Inlet Size 1-1/4 in Material - Housing Polypropylene Motor Hz Rating 50/60 Motor Type Microprocessor Controlled Variable Speed Brushless DC Motor Motor Voltage 100 - 240 VAC Mounting Cable Gland for Mounting at the Tank Top Outlet Size 1-1/4 in Material - Seal EPDM/EPR Seal Type Gasket Material - Balls Glass Max Flow 1.65 gpm (375 lph) Max Temperature 122°F (50°C) Noise Level <70 dB(A) Max Pressure 10 bar Turndown Ratio 1:800 Voltage 100 - 240 V, 50/60 Hz Accuracy +/-1% Repeatable Enclosure IP 65 Max Viscosity 3000 cps (With Spring-Loaded Valve), 200 cps (Without Spring-Loaded Valves) Speed 160 stroke/min Signal Output 42V 2A (Alarm Relay) Control Variant Basic Diaphragm Diameter 124 mm Fluid Type Water Material - Dosing Head Polypropylene Max Suction Lift 19.7 ft Model DME Operation Modes Manual Speed Control Plug Type USA, Canada Pulse Control Setting range 0.00392 - 750 ml/pulse Pulse-Based Batch Control Setting Range 39.1 ml/batch - 750 l/batch Signal Input 5VDC (Pulse, Level Sensor), 250 Ohm at 0/4 to 20 mA (Analog, Pulse, Level), 3.3 ms(Pulse-Repetition) Valve Type Standard Displacement Positive Displacement
