📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
| Notes | F430PVDF 40/33Z 27" |
|---|---|
| Weight (lbs) | 3.09 |
- OVERVIEW
- SPECIFICATIONS
- DOCUMENTS
- DOCUMENTATION
- PARTS / ACCESSORIES / KITS
- REVIEWS
- VIDEO
- Flux F430PVDF 40/33Z 27"
The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You want to pump adhesive substances like paints or liquids which tend to crystallize or harden.
The inner tube houses the shaft. It is sealed at the bottom by a mechanical seal through which the shaft passes. Consequently the shaft does not come into contact with the liquid except for the small section between the impeller and seal.Special advantages:- The shaft support bearings are isolated from the liquid
- Steel cored inner tube in PP and PVDF pumps. This prevents elongation of the plastics, even at high temperatures
- Extended service life through well proven seal design
Product Type Tube Brand Flux Material - Impeller ETFE Material - Oring FKM Material - Seal FKM Seal Type Mechanical Max Flow 58 gpm Max Temperature 176°F (80.0°C) Max Pressure 30 mWS Immersion Length 27 in (700 mm) Notes F430PVDF 40/33Z 27"
