📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Notes | Thermo-Flo Gas Flow Switch, PVDF, Long, 3/4" G |
---|---|
Weight (lbs) | 2 |
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Product Type | Sensor |
---|---|
Brand | Flowline |
Max Temperature | 140°F (60°C) |
Check Type / Wetted Material | PVD |
Max Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
Voltage | 12-36 VDC |
Cable Length | 10ft (3m) |
Cable Type | 4-conductor, shielded #22 AW |
Cable Material | PFA |
Consumption | 70 mA maximum |
Contact Rating | 60 VA, 1A maximum |
Contact Type | SPST relay |
Gasket Material | Viton |
Sensor Length | Long |
Material - Sensor | PVDF |
Sensor Rating | NEMA 4X (IP65) |
Set Point Range | 0.04 to 3 fps (0.012 to 0.91 mps) |
Notes | Thermo-Flo Gas Flow Switch, PVDF, Long, 3/4" G |
Process Mount | 3/4 in G |