📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
| Weight (lbs) | 2 |
|---|
- OVERVIEW
- SPECIFICATIONS
- DOCUMENTS
- DOCUMENTATION
- PARTS / ACCESSORIES / KITS
- RELATED PRODUCTS
- REVIEWS
- VIDEO
- Application
The general purpose ultrasonic level transmitter provides continuous level measurement up to 18.0' (5.5m) with a 4-20 mAsignal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.
Fields of Application:- Level detection, switch and control functions up to 18.0' (5.5m)
- Configuration is fast and easy via WebCal software and USB adapter
- Narrow 3'' beam width and short 8'' dead band optimized for small tanks
- Four programmable relays for switch, pump or valve control and fail-safety
- 1 pump or valve with 3 alarms
- 2 pumps (lead-lag) with 2 alarms
- pumps (duplexing) with 2 alarms
- independent switch point alarms
- PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
- Automatic temperature compensation for accurate measurement
Brand Flowline Product Type Transmitter Material - Housing PVDF Max Temperature 140°F (60°C) Max Pressure MWP = 30 PSI (2 bar) Voltage 24 VDC (loop) Accuracy +/- 0.2% of range Cable Length 48in (1.2m) Cable Type 9-conductor, shielded Enclosure Type 6P, encapsulated, corrosion resistant & submersible Approvals cFMus Beam Width 3in (7.6cm) Cable Material Polyurethane Configuration WebCal PC Windows USB 2.0 Consumption 0.5W Contact Rating 60 VA, 1A maximum Contact Type SPST relays Dead Band 8 in (20cm) Enclosure Material Polycarbonate Gasket Material Viton Resolution 0.079 in (2 mm) Signal Fail-Safe 4 mA, 20 mA, 21 mA, 22 mA or hold last Signal Output 4-20 mA, two-wire Fob USB Adapter With Fob Process Mount 1 in NPT
