📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Weight (lbs) | 1 |
---|
The general purpose ultrasonic level transmitter provides continuous level measurement up to 9.8 inch (3m) with a 4-20 mA signal output, and is configured via our free Webcal software. The level sensor has 4 programmable relays with selectable hysteresis and fail-safe logic. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for day tank, skid, IBC, sump and process tank level applications.
Product Type | Transmitter |
---|---|
Brand | Flowline |
Material - Housing | PVDF |
Max Temperature | 140°F (60°C) |
Max Pressure | MWP = 30 PSI (2 bar) |
Voltage | 24 VDC (loop) |
Accuracy | +/- 0.2% of range |
Cable Length | 48in (1.2m) |
Cable Type | 9-conductor, shielded |
Enclosure | Type 6P, encapsulated, corrosion resistant & submersible |
Approvals | cFMus |
Beam Width | 2in (5cm) |
Cable Material | Polyurethane |
Configuration | WebCal PC Windows USB 2.0 |
Consumption | 0.5W |
Contact Rating | 60 VA, 1A maximum |
Contact Type | SPST relays |
Dead Band | 4 in (10 cm) |
Enclosure Material | Polycarbonate |
Gasket Material | Viton |
Resolution | 0.039 in (1 mm) |
Signal Fail-Safe | 4 mA, 20 mA, 21 mA, 22 mA or hold last |
Signal Output | 4-20 mA, two-wire |
Fob USB Adapter | Without Fob |
Process Mount | 1 in NPT |