📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Notes | Thermo-Flo with Compact Flow Controller, Long, PP, w/Strobe, 3/4" NPT |
---|---|
Weight (lbs) | 3 |
Offered in liquid and gas sensor types, the general purpose flow switch package provides reliable no or low-flow detection of relatively clean non-coating media with a 16A compact flow controller for pump or process protection. Liquid examples includes water and sulfuric acid. The optional flash alarm brings attention to low-flow alarm conditions. Available in Polypropylene-Ryton and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases for low-flow control. The flow sensor is best applied in applications with relatively constant temperature.
Product Type | Sensor |
---|---|
Brand | Flowline |
Max Temperature | 140°F (60°C) |
Check Type / Wetted Material | PP-Ryton |
Max Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
Voltage | 120 / 240 VAC @ 50-60 Hz |
Enclosure | NEMA 4X (IP65) |
Conduit Entrance | 1/2 in NPT |
Configuration | Controller with Strobe Alert |
Consumption | 0.25A maximum |
Contact Rating | 250 VAC @ 10A |
Contact Type | SPDT relay |
Enclosure Material | PP, UL94VO, PC |
Gasket Material | Viton |
Sensor Length | Long |
Material - Sensor | PP / Ryton |
Set Point Range | 0.04 to 3 fps (0.012 to 0.91 mps) |
Strobe Flash | 1 per second |
Strobe Type | Xenon tube |
Notes | Thermo-Flo with Compact Flow Controller, Long, PP, w/Strobe, 3/4" NPT |
Process Mount | 3/4 in NPT |