📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
| Notes | Flow Switch |
|---|---|
| Weight (lbs) | 3 |
- OVERVIEW
- SPECIFICATIONS
- DOCUMENTS
- DOCUMENTATION
- PARTS / ACCESSORIES / KITS
- RELATED PRODUCTS
- REVIEWS
- VIDEO
- Application
Offered in liquid and gas sensor types, the general purpose flow switch package provides reliable no or low-flow detection of relatively clean non-coating media with a 1A relay output and compact junction box for wiring termination. Liquid examples includes water and acetic acid. Available in PP-Ryton and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Fields of Application:- Rugged Polypropylene-Ryton or PVDF sensor for corrosive liquids and gases
- Adjustable set point with LED for flow or no-flow status indication
- Polypropylene enclosure rated NEMA 4X with swivel base for conduit alignment
- 60VA relay selectable NO or NC via power supply wiring polarity
- Solid state sensor is not damaged by over-ranging flow velocities
Brand Flowline Product Type Sensor Max Temperature 140°F (60°C) Check Type / Wetted Material PVDF Max Pressure 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C Voltage 120 / 240 VAC @ 50-60 Hz Enclosure NEMA 4X (IP65) Conduit Entrance 1/2 in NPT Configuration Controller only Consumption 0.25A maximum Contact Rating 250 VAC @ 10A Contact Type SPDT relay Enclosure Material PP, UL94VO Gasket Material Viton Sensor Length Long Material - Sensor PVDF Set Point Range 1 to 90 fps, (0.3 to 27 mps) Notes Flow Switch Process Mount 3/4 in G
