📞 +1 877-742-2878
- Home /
- Stenner /
- Accessories
Stenner pumps - accessories
Stenner offers four primary accessories in addition to their pumps to complement the collection. These accessories are essential for the considerable amount of these Stenner pumps. The functionality of the Tanks, Water meters, PCM, and Flow Switches are what enhance the pumps and take them to the next level.
Highlights
- White or UV Gray
- Polyethylene Construction
- Level Indicators
Tanks Sold Separately
- 7.5-gallon (28.4 liters)
- 15-gallon (56.8 liters)
- 30-gallon (113.6 liters)
Highlights
- Reed switch style
- Pulsing dry contact signal
Specifications
- Temperature: Range 35-122 F
- Pressure Ratings: 15-100 psi
- Maximum Current: 20 mA
- Maximum Voltage 24 VDC or VAC
- Sensor: Reed Switch
- Cable Length: 6 ft
Stainless Steel or Plastic Water Meter
The water meter made of plastic and stainless steel incorporates a switch made of reeds to provide a pulsing dry contact signal. The pump is activated by a signal from the meter in accordance with the water volume to dose.
Features
- Chemical Resistant plastic housing
- On-time duration set with knob adjustment
- Locking feature
- 10" power cord and jacketed signal input cable
How the PCM Works
The operating duration range is defined at the factory using the PCM model. Without acquiring a new model, the range can be adjusted to any other time ranges. By moving the jumpers on the printer circuit board underneath the cover, the time range can be converted.
Specifications
- Switching Function Contact: closes at increasing flow, opens at decreasing flow
- Pressure Rating: Maximum 145 psi
- Medium Temperature/Ambient Temperature: Maximum 212F/Maximum 158 F
- Protection Class: IP 65
- Switching Current: Maximum 1A
- Switching Voltage: Maximum 230 VAC, 48 VDC
- Switching Capacity: Maximum 26 VA, 20 W
How the Flow Switch Installation Works
The paddle-style, two-wire dry contact flow switches for PVC and copper are both made of glass fiber-reinforced plastic. The flow switch is built with a magnetic force that resets the paddle, preventing spring wear. The flow switch working mode on the metering pumps in the Stenner S10P, Econ FP, and S Series can connect to a two-wire flow switch that accepts a dry contact signal.
