📞 +1 877-742-2878
MP Pumps hot oil pumps
MP Pumps' hot oil pumps are designed for efficiency in various applications, including industrial use and OEM. Each hot oil pump can withstand oil temperatures up to 650°F.
Features
- Choice of electric motor or standard
- Utilizies ambient air
- Available in cast iron, bronze, or aluminum construction
- Can withstand oil temperatures up to 650°
Specifications
- Max Flow:85 GPM
- Max Head: 130 FT
- Impeller: 5.9" steel, enclosed
- Motor: 3 HP
Features
- Choice of electric motor or standard
- Utilizies ambient air
- Available in cast iron, bronze, or aluminum construction
- Can withstand oil temperatures up to 650°
Specifications
- Max Flow:195 GPM
- Max Head: 135 FT
- Impeller: 5.96" cast iron, enclosed
- Motor: 5 HP
Features
- Choice of electric motor or standard
- Utilizies ambient air
- Available in cast iron, bronze, or aluminum construction
- Can withstand oil temperatures up to 650°
Specifications
- Max Flow:320 GPM
- Max Head: 160 FT
- Impeller: 6.45" cast iron, enclosed
- Motor: 10 HP
Features
- Choice of electric motor or standard
- Utilizies ambient air
- Available in cast iron, bronze, or aluminum construction
- Can withstand oil temperatures up to 650°
Specifications
- Max Flow:500 GPM
- Max Head: 190 FT
- Impeller: 7.0" cast iron, enclosed
- Motor: 20 HP
Features
Specifications
Features
- Circuit protection against voltage and current upsets
- Highly reliable timing circuit
- Automatic control options include 4-20mADC direct control or external pacing with a stop function
- Indicator lights panel mounted
Specifications
- Max Flow: 120 GPD
- Max Pressure: 100 PSI
- Max Viscosity: 1000 CPS
- Average Current Draw 115 VAC: Amps – 1.0
Summary
Based on the reliable PULSAtron Series pump platform, the E+ Ratio Control (RC) diaphragm metering pump offers manual control over stroke length, automatic speed control based on a water meter input signal, and selectable ratio control from 0.1 Oz/Gallon to 1.0 Oz/Gallon. With three available models, it features pressure capabilities up to 100 PSIG (7 BAR) and flow capabilities ranging from 44 GPD (7 LPH) to 120 GPD (18.9 LPH). The PULSAtron Series is designed for precise dosing with a reproducibility within ± 2% of maximum capacity. The RC Series is particularly suitable for Medicator applications, accurately dosing nutritional supplements to enhance livestock health.
Ask Now
Features
- Automatic control is available with either 4-20mADC direct control or external pacing, which includes a stop function
- Panel mounted fuse
- Indicator lights panel mounted
- Solenoid protection by thermal overload
Specifications
- Max Flow: 240 GPD
- Max Pressure: 150 PSI
- Max Viscosity: 20,000 CPS
- Turndown Ratio 100:1
Summary
Based on the reliable PULSAtron Series pump platform, the E+ Ratio Control (RC) diaphragm metering pump offers manual control over stroke length, automatic speed control based on a water meter input signal, and selectable ratio control from 0.1 Oz/Gallon to 1.0 Oz/Gallon. With three available models, it features pressure capabilities up to 100 PSIG (7 BAR) and flow capabilities ranging from 44 GPD (7 LPH) to 120 GPD (18.9 LPH). The PULSAtron Series is designed for precise dosing with a reproducibility within ± 2% of maximum capacity. The RC Series is particularly suitable for Medicator applications, accurately dosing nutritional supplements to enhance livestock health.
Buy Now
Features
- Automatic control with a fully scalable 4-20mA input signal, providing flexibility and precision in operation
- Relay output for computer interface or AC power
- Alarm signals for signal loss – full count – circuit failure – pulse overflow and pulse rate high
- Timed sequences can be configured for specific intervals and rates, facilitating repetitive metering
Specifications
- Max Flow:504 GPD
- Max Pressure:300 PSI
- Max Viscosity: 1000 CPS
- Average Current Draw 115 VAC: Amps – 1.0, 230 VAC: Amps – 0.5
Summary
The Pulsation Series MP stands as a true microprocessor-controlled instrument designed for precise and accurate metering control. Packed with standard features, the Series MP includes automatic control via 4-20mA or 20-4 mA inputs, external pace with a stop feature, and a 16-character LCD display supporting English, French, and German languages. The optional 4-20mA output signal provides remote indication of pump speed, allowing confirmation that the pump is adjusting to process parameters and estimating chemical usage over time. With nineteen distinct models, the Series MP offers pressure capabilities up to 300 psi (21 bar) at 3 gpd (0.5 lph) and flow capacities reaching 504 gpd (79.5 lph) at 20 psi (1.3 bar). The turndown ratio stands at an impressive 1000:1, ensuring there is a Pulsatron MP Series pump to perfectly fit your process requirements.
Buy Now
Features
- Comprehensive timer control integrated into a single, unique package
- Solid state 7 day electronic timer
- Few moving parts and wall mountable
- Priming is safe and easy with a robust, leak-free bleed valve assembly, ensuring reliability
Specifications
- Max Flow: 30 GPD
- Max Pressure: 100 PSI
- Max Viscosity: 1000 CPS
- Average Current Draw 115 VAC: Amps – 1.0, 230 VAC: Amps – 0.5
Summary
The Pulsation Series T7 is specifically designed for timed chemical product feeding, commonly used for applications like biocide feed in open-air cooling towers. The feed cycle is initiated and controlled by the programmable timer, offering a comprehensive and cost-effective metering solution for timed applications. The Series T7 features a 7-day programmable timer, adjustable in 1-minute increments, with up to 8 on/off cycles per day. Timed events can be set for any day of the week in a 7-day cycle. Additional control features include a standby mode, continuous 'ON' mode, and the ability to adjust stroke length from 0 to 100%.
Buy Now
Features
Specifications
Summary
Buy Now
Applications
- rations
Specifications
- Max Flow: 200 GPM
- Max Head: 160 FT
- Max Internal Pressure: 75 PSI
- Max Liquid Temperature: 190 °F
Summary
March Pump's industrial TE-10K-MD stands as an American-made seal-less centrifugal magnetic drive pump. The standard wet end is constructed with materials such as natural Kynar (PVDF), glass-filled Kynar (PVDF), Viton, Carbon, and Ceramic. It features a 3-inch male pipe thread for the inlet connection and a 2-inch male pipe thread for the outlet. This pump is designed for versatile use in different environments.
Buy Now
Applications
- Aquariums
Specifications
- Max Flow:14 GPM
- Max Head: 11.5 FT
- Voltage: 230V
- Power: .05 HP
Summary
March Pump's industrial 140-4 is an American-made seal-less centrifugal magnetic drive pump that is often used in aquariums. It is capable of producing a maximum flow of 14 gallons per minute at 2 feet, with a maximum head of 11.5 feet (approximately 5 PSI). The standard wet end, including the materials in contact with the solution, is made up of Polypropylene, Buna N, and Ceramic. The inlet connection is 1-1/8 inch smooth, while the outlet is 7/8 inch smooth. It can handle a variety of chemicals, including but not limited to Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol, Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh Water, Salt Water, and numerous others.
Buy Now
Applications
- Laser Cooling
- Medical Systems
- Filter Systems
- Processing Equipment
Specifications
- Max Flow: 3.3 GPM
- Max Head: 40 FT
- Max Internal Pressure: 50 PSI
- Max Liquid Temperature: 190 °F
Summary
March Pump's industrial 320-CP-MD is an American-made seal-less centrifugal magnetic drive pump suitable for various uses. It features a standard wet end composed of Polypropylene, Viton, and Ceramic materials. The inlet connection is 1/2 inch male pipe thread, and the outlet is 3/8 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.083 Horsepower fan-cooled motor, operational on either 50 or 60 hertz, with performance differences between the frequency options. The pump can withstand a maximum internal pressure of 50 PSI, and it is designed to handle mildly or highly corrosive chemicals, acids, and solvents, with a maximum liquid temperature of 190 Fahrenheit or 87 Celsius.
Buy Now
Applications
- Laser Cooling
- Medical Systems
- Filter Systems
- Processing Equipment
Specifications
- Max Flow: 12 GPM
- Max Head: 68 FT
- Max Internal Pressure: 50PSI
- Max Liquid Temperature: 190 °F
Summary
March Pump's industrial 335-CP-MD is an American-made seal-less centrifugal magnetic drive pump with a standard wet end composed of Polypropylene, Viton, and Ceramic materials. The inlet connection is 3/4 inch male pipe thread, and the outlet is 3/4 inch male pipe thread. The pump comes with a standard motor, available in either 1 Phase 115/230V or 3 Phase 230/460V, featuring a 0.33 Horsepower totally enclosed fan-cooled motor. It is designed to operate on either 50 or 60 hertz for versatile use.
Buy Now
Applications
- Marine Equipment
- Fountains
Specifications
- Max Flow: 2.7 GPM
- Max Head: 10.6 FT
- Max Internal Pressure: 50 PSI
- Max Liquid Temperature: 120 °F
Summary
March Pump's industrial 893 Series is an American-made submersible seal-less centrifugal magnetic drive pump. It operates submerged and features a standard wet end with components like Noryl, Nylon, Carbon/Teflon, Buna N, Stainless Steel, and Ceramic Magnet. When submerged, Epoxy, Delrin, and the motor leads are also in contact with the solution. The inlet connection is 3/8 inch female pipe thread, and the outlet is 3/8 inch smooth. The pump is equipped with a standard motor, a 0.006 Horsepower DC Brushtype Motor, available in 24 Volts, with an operating range from 0 to 26 Volts.
Buy Now
Applications
- Etching Equipment
- Ice Flakers
- Plate Processors
- Marine Air Conditioning
Specifications
- Max Flow: 6 GPM
- Max Head: 7 FT
- Max Internal Pressure: 50 PSI
- Max Liquid Temperature: 190 °F
Summary
March Pump's industrial MDX-1/2 is an American-made seal-less centrifugal magnetic drive pump. The standard wet end features components like Polypropylene, carbon-filled Kynar (PVDF), Buna N, and Ceramic Magnet, ensuring compatibility with various solutions. The inlet connection is 1/2 inch smooth, and the outlet is 1/2 inch smooth. The pump comes with a standard motor, available in 1 Phase 115V or 230V, featuring a 0.025 Horsepower fan-cooled motor. It is designed to operate on 60 hertz at 115V or 50 and 60 hertz at 230V.
Buy Now
