📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Notes | Aro 440SS Drum Mounted Airless Spray Package, 28:1, includes pump #NM2328A-11-G11, 3" air motor, cover, screened inlet cover and foot screen **Non-Cancellable/Non-Returnable |
---|---|
Weight (lbs) | 1 |
Additional equipment is sometimes needed to keep an extrusion or finishing pump primed. Follower plates, lifts and rams assist the flow of material into the pump inlet. Lifts can be used for fluids with viscosities up to 200,000 cPs. Rams are needed for fluids with higher viscosities. If a fluid is stringy, a ram may be needed for fluids with viscosities as low as 60,000 cPs. Carts allow for mobility when engaging in finishing applications where pump location counts.
Finishing pumps cover a broad range of applications including everything from applying the final coat of varnish on new furniture to applying a protective film of oil on new steel. Typical fluids used in finishing applications include paints, resins, lacquers, sealers, adhesives, varnishes, lubricants and stains.
Product Type | Pump |
---|---|
Brand | ARO |
Inlet/Outlet Connection Type | SAE |
Inlet Size | 1/2 in |
Motor Type | Air |
Outlet Size | 1/4-18 in |
Max Flow | 0.38 gpm (1.4 lpm) |
Noise Level | 85 dB(A) |
Air Inlet Pressure Range | 0 - 150 psi (0 - 10.34 bar) |
Fluid Pressure Range | 0 - 4200 psi (0 - 289.7 bar) |
Stroke Length | 3 in |
Turndown Ratio | 28:1 |
Notes | Aro 440SS Drum Mounted Airless Spray Package, 28:1, includes pump #NM2328A-11-G11, 3" air motor, cover, screened inlet cover and foot screen **Non-Cancellable/Non-Returnable |
Displacement | Positive Displacement |