📞 +1 877-742-2878
A premier source for reliable pumps and process controls, backed by advanced expertise, strong product support, and customer-focused service.
Visit the website >>
Industrial-grade tools, including Lifting Solutions, Engine Starting, Air Motors, Assembly Solutions, Construction, Drilling, Bolting, and Surface Preparation Tools.
Visit the website >>
A global leader in process, fluid handling, and wastewater treatment systems, fully engineered and precision-built from concept to operation.
Visit the website >>
For over 30 years, ProFlow has delivered modular fluid handling systems backed by expert support, advanced technology, and uncompromising quality worldwide.
Visit the website >>Product images shown are for illustration purposes only
and may not be an exact representation.
| Weight (lbs) | 9.5 |
|---|
115 or 230 VAC AC-5C-MD
Magnetic Drive Pump
AC-5B-MD from March Pump Beer Pump is a centrifugal magnetic drive pump with an American seal that is ideal for homebrewing. It has a maximum flow rate of 17 gallons per minute at 1 foot and a maximum head of 27 feet (11PSI). Polysulfone, Buna N, Ceramic, and Ceramic Magnet make up the standard wet end (the materials that come into contact with the solution). The inlet and outlet connections are 1 inch female pipe thread and 1/2 inch male pipe thread, respectively. The standard motor is a 1 Phase 115V or 230V 0.125 Horsepower fan cooled motor that can operate on 50 or 60 hertz (there are performance differences between the hertz options).
Great for Chemicals Including
The AC-5B-MD has pumped Acetic Acid, Acetone, Ammonium Sulfate, Citric Acid, Ethylene Glycol, Ferric Sulfate, Hydrogen Peroxide, Potassium Hydroxide, Sodium Chloride, Fresh Water, Salt Water, and many more chemicals. The AC-5C-MD may have been modified to handle these chemicals. Please contact Burt Process to review your application before using the AC-5C-MD for any of the above-listed chemicals.
| Brand | March |
|---|---|
| Product Type | Pump |
| Application | Beer Pump |
| Inlet/Outlet Connection Type | FPT / MPT |
| Inlet Size | 1 in |
| Material - Housing | Polysulfone |
| Material - Impeller | Polysulfone |
| Material - Oring | Nitrile |
| Motor Hz Rating | 50/60 |
| Motor Voltage | 115 VAC |
| Outlet Size | 1/2 in |
| Max Flow | 17 gpm (64.4 lpm) |
| Max Head | 27 ft / 6 m |
| Material - Wet End | Polypropylene (PPG) |
| Motor Voltage Options | 115 VAC |
| Horsepower | 0.125 |
| Max Head Range | 16 - 30 ft |