The Polymer Feed Systems activates polymers through a patented, motor less, high energy, activation chamber. The chamber uses the energy available in the dilution water flow to activate all types of liquid polymers. The polymer blending is activated as it passes through the high turbulence generated by the patented orifice. The pressure required to operate the chamber is less than 10 psi. The orifice opening automatically compensates for solution flow changes. This assures that the polymer activation energy level remains adequate for the flow range of the feeder. The Liquid Polymer Feed Plus Activation Chamber components are made of corrosion resistant thermoplastics. The system is assembled with o-rings and stainless steel fasteners.

• Polymer Plus feed capacities range from 0.1 to 576 GPD (0.02 to 91 LPH). The polymer pump can be a peristaltic pump, a diaphragm pump, or progressing cavity pump.
  
• Dilution water flow capacities range from 10 GPH to 100 GPM (40 LPH to 380 LPM).
  
• Pump controller that can accept a 4-20 mA signal. Digital display indicates pump speed.
  
• H-O-A Switch to allow remote start-stop control.
  
• Timer to allow a flush cycle.
  
• Contacts for remote indication of Alarm,Pump Run, or Auto Mode.
  
• Low polymer flow alarm. The switch has a thermal dispersion type sensor, with no moving parts. The trip point is adjustable down to 5 GPD (0.8 L/H)
  
• Pump speed controlled by the dilution water flow to maintain solution concentration.
  
• Modulating, motor operated, dilution water flow control valve.
  
• In-line aging tank. Tank is fiberglass reinforced and rated for 125 psi. No additional level controls or pumps are needed.
  
• Conventional aging tank systems with level controls, agitation, and solution metering pumps.
  
• Custom designs, such as explosion proof or other operating voltage, as required to meet your needs.