📞 +1 877-742-2878
Product images shown are for illustration purposes only
and may not be an exact representation.
Weight (lbs) | 2 |
---|
The Georg Fischer Signet 9950 Transmitter is a two-channel controller that can support two sensors of the same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal Converter.
The GF Signet 9950 includes advanced features such as derived functions, advanced multiple relay modes, and timer-based relay functions. Derived functions allow for the control of a relay or current loop with the sum, delta (difference), or ratio of two measurements, for example, delta pressure and delta temperature. Multiple relay modes allow up to three signals to be used for the control of a single relay. This can be any combination of analog and binary inputs. The timer relay modes allow the relay to be activated on a repeating basis from every minute to once every 30 days. Weekday timer mode allows a relay to be turned on on a specific day or days of the week at a specific time. The 3-9950.393-3 Relay Module includes the ability to interface up to four binary inputs. The binary inputs are compatible with either open collector or mechanical contacts. The binary inputs can supply power to the four inputs or accepts powered outputs from external devices. These inputs can be used with level switches, flow-switches, pressure switches, or other devices. The inputs can be used to directly control the relays of the 9950 or can be used in combination with the measurement readings for advanced control of your process.
The GF Signet 9950 supports the following relay modules:
Features:
Applications:
Brand | GF Signet |
---|---|
Product Type | Transmitter |
Warning | Max Altitude of 4,000 m (13,123 ft) |
Material - Housing | PBT |
Max Pressure | 1000 psi (69 bar) |
Accuracy | ± 32 μA max. error @ 25 °C @ 24 VDC |
Cable Type | 12 to 28 AWG |
Compatibility | Sensors for: Flow, pH/ORP, Conductivity/Resistivity, Pressure, Temperature, Level/Volume, Salinity, Dissolved Oxygen, Other (4 to 20 mA) |
Enclosure | NEMA 4X/IP65 (front face only) |
Fitting | 1/4 DIN |
Power Requirements | 24 VDC nominal (10.8 to 35.2 regulated) |
Measurement Types | Flow, pH/ORP, Conductivity/Resistivity, Pressure, Temperature, Level/Volume, Salinity, Dissolved Oxygen, Other (4 to 20 mA) |
Input Channels | Two |
Input Type | Digital (S3 L) or Frequency |
pH Range | -1 to 15 pH |
Documentation | GF Signet Instrument Documents |