📞 +1 877-742-2878

FREE SHIPPING ON QUALIFYING ITEMS

Plastomatic - Pressure Gauge Guards

Plast-o-Matic's pressure gauge guards reduce system downtime and instrument failures. These instruments have various controls and alarms to indicate conditions or signals when unwanted liquid is present.

Features:

  • Offers an inexpensive initial investment
  • Highest pressure rating
  • Reduces system down time
  • Optional 1/2" NPT pipe connection x 1/2" all-plasticconnection

Specifications

  • Max Pressure: 200 PSI
  • PVC, CPVC, PP, PVDF
  • Standard 2 1/2" gauge included

Features:

  • True union ends enable easy instillation & removal
  • Elastomers are available in FKM or EPDM
  • Bleed port assures trouble-free filling
  • Food grade elastomers available on request

Specifications

  • Seal material: FKM, EPDM
  • : 1/4" NPT instrument connection
  • High quality 21/2" stainless steel

Features:

  • Pressure ranges from 30” vacuum to 200 PSI
  • Stainless steel construction with ceramic sensor
  • IP65 and IP67 enclosure ratings
  • 4-20 mA output signal

Specifications

  • Max pressure: 200 PSI
  • Max ambient temperature: 80ºF
  • Current Consumption: 2-wire: 25 mA max
  • Diaphragm material: Viton, FKM, PTFE

Features:

  • Tested to 1,000,000 cycles in laboratory conditions
  • Adjusts easily with adjusting screw
  • NEMA 4X design and patented Fail-Dry® enhance system
  • Electrical switch is UL recognized and CSA approved

Specifications

  • Max Pressure: 150 PSI
  • Standard 16 Amp. Switch Rating: 16 Amps @ 125 VAC
  • 3 Ranges of Operating Pressure: 15-50 PSI, 50-100 PSI, 100-150 PSI
  • Electrical Cable: 18" 3-wire stranded copper cable

Features:

  • Series DPG: Differential Pressure Gauge, 2.5" Dial
  • Series DPGS: Adjustable Differential Pressure Gauge/Switch, 2.5" Dial
  • Corrosion-resistant thermoplastic connections; PVC or CPVC
  • EPDM or FKM elastomers

Specifications

  • Max Line Pressure: 200 PSI
  • ± 2% accuracy
  • 1/8" FNPT Connections
  • 0-15 PSID or 0-30 PSID Gauge

Features:

  • Large, rugged flow nozzle for minimal drop
  • Isolated magnetic movement
  • Long life, wear-resistant design
  • Non-clogging design

Specifications

  • Flow ranges to 200 GPM
  • Max pressure rating: 100 PSI
  • Accuracy is ±5% FS

Features

  • Ideal for leak detection, water sensing and relief tanks
  • Suitable for any conductive liquid
  • Low DC voltage control wire signals presence of liquid
  • Sensor available in PVC, CPVC, Natural Polypropylene, and PVDF

Specifications

  • 1/4" connection
  • Sensing points are 18-8 stainless steel
  • IP67 DIN Connector with 2M molded cordset