📞 +1 877-742-2878

FREE SHIPPING ON QUALIFYING ITEMS

netzsch accessories and optional equipment

Speed_monitoring_device

dry running protection

  • For NEMOLAST® Stators
  • Dry running protection units
  • Continually monitors the surface temp
  • Controller set for two diff switch-off temps

Speed_monitoring_device

flow sensing unit

  • For Solid Stators
  • Protects a pump fitted w/ a solid stator
  • Signal sent to the control for pump shutdown

Speed_monitoring_device

speed monitoring device

  • Monitors rotational speed of the pump
  • Impulse switches mounted to drive
  • One or more contacts
  • Block construction

pressure_control_device

diaphragm pressure gauge

  • G3/4 inch connection
  • Operating pressure displayed by means
  • of a pressure gauge
  • For use with subs. of low-medium viscosity
  • Automatic shut-off

pressure_control_device

diaphragm pressure gauge

  • Differs from the G3/4 inch DN50 open flange
  • For highly viscous&clogging substances

pressure_control_device

pressure control dtsl 3

  • Pressure displayed by a Bourdon gauge
  • Automatic shuts down when max pressure 
  • Cut-out pressure is adjustable

Permanent_lubricator

multi-function instrument

  • Display indicates the current pressure
  • Easy-to-install unit
  • Additional points for emergency shut-down

Permanent_lubricator

quench pot

  • Dry running can be securely prevented
  • Prevents crystallizing contact w/ the atmo.

Permanent_lubricator

permanent lubricator

  • Supports the shaft seal&packed glands
  • Continually greases the grease chamber 

ring_dosing_nozzle

pressurized flushing

  • For Double Mechanical Seal Systems
  • Sealing press. must be at least 2 bar above
  • Control the volume flow in seal chamber

ring_dosing_nozzle

gear joint filling unit

  • Joints must be filled with the lubricating oil
  • A quick and complete filling
  • Guaranteed with use of Gear Joint Filling
  • Unit complete w/oil container

ring_dosing_nozzle

ring dosing nozzle

  • Used for high viscosity media
  • To reduce pressure loss in the pipeline
  • Fits behind the pressure joint of the pump

machine_feet

chemical anchors

  • Used to fix pump baseplates to the ground
  • Two-comp adhesive to secure the anchor
  • Allows subs. mounting of the baseplate

machine_feet

stator removal tool

  • Aids in the removal and mounting of stators
  • NM 045 recommended use of strap wrench
  • NM 053 upward chain wrench recommended

machine_feet

machine feet

  • Mounted directly to the baseplate
  • No crevices or hollow areas
  • Easy to clean floor under the baseplate
  • Stainless steel threaded spindle 

covers_for_drive_monitors

trolley assemblies

  • When pump needs to be used at diff locations
  • Variety of trolley assemblies to help w/ transport

covers_for_drive_monitors

covers for drive monitors

  • Stainless steel covers for the drive
  • For units operated in a wet environment
  • Protection against spraying& condensation
  • Weather protection for drives installed in open air environ.