📞 +1 877-742-2878

FREE SHIPPING ON QUALIFYING ITEMS

FLOWLINE ECHOpro® lr 26 pulse radar liquid level sensor

flowline-echopro-lr26-pulse-radar-level-sensor

The intrinsically safe 6.3 GHz. pulse radar transmitter provides continuous level measurement up to 114.8’ (35m) with a 4-20 mA signal output, and is configured via its integral push button display module. The non-contact liquid level sensor is intended for chemical and petroleum storage or process applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Select this sensor for harsh process conditions with corrosive or low dielectric media, heavy surface foam or agitation, higher pressure, steam, condensation or vapor, and installation in a flange fitting. Due to the wider beam angle, special attention should be given to ensure that the sensor is located with unobstructed measurement space. Typical applications include process tanks.

echopro lr 26 pulse radar liquid level sensor features:

  • 316L antenna with PTFE inner shield for corrosive media
  • Simple configuration via integral push button display module
  • 6.3 GHz. pulse radar is unaffected by most foam and agitation
  • 12” (30cm) dead band enables utilization of the entire tank
  • LCD displays level in feet or meters with percent of span bar
  • Optional display mode indicates the echo signal return curve
  • Auto-temperature compensation for accurate measurement
  • Fail-safe diagnostics with selectable signal fail-safe outputs
  • Recognition, storage and rejection of false echo signal returns
  • IP67 stainless enclosure with polycarbonate display window

 

echopro lr 26 pulse radar performance:

The LR26 features a wide beam, low frequency, 6.3 GHz. pulse radar measurement that’s unaffected by most process conditions, and is the right choice for extreme applications with significant foam, agitation, steam or pressure. Given the wide beam angle, care should be taken to ensure that the installed sensor has plenty of unobstructed measurement space.

echopro lr 26 pulse radar dimensions:

flowline-echopro-lr26-pulse-radar-level-sensor-dimension_1

General Specifications for flowline echopro level transmitters:

RANGE:  12” to 114.8’ (30cm to 35m)

FREQUENCY: 6.3 GHz.

ACCURACY: ± 10 mm

DEAD BAND: 12” (30cm)

BEAM ANGLE: 20º

CONFIGURATION: Push button; WebCal® PC Windows® USB® 2.0

MEMORY: Non-volatile

DISPLAY TYPE: LCD, dot matrix

DISPLAY UNITS:  Feet and meters

DISPLAY BAR: Percent of span

DISPLAY GRAPH: Echo signal curve

SUPPLY VOLTAGE:  21.6 to 26.4 VDC

MAX CONSUMPTION: 22.5 mA

SIGNAL OUTPUT: 4-20 mA, two-wire

SIGNAL INVERT: 4-20 mA, 20-4 mA

SIGNAL FAIL-SAFE: 3.9 mA, 20.5 mA, 22 mA

PROCESS TEMP: F: -40º to 266º, C: -40º to 130º

TEMP COMP: Automatic

STORAGE TEMP: F: -40º to 176º, C: -40º to 80º

PRESSURE: -14.5 to 580 psi (-1 to 40 bar)

ENCLOSURE RATING: IP67

ENCLOSURE MATERIAL: 316L stainless steel w/silicone gasket

ENCLOSURE WINDOW MATERIAL:  Polycarbonate

CONDUIT ENTRANCE:  (1) 1/2” NPT connectors

ANTENNA MATERIAL:  316L w/PTFE inner shield

PROCESS MOUNT:  304 SS bracket or 1” NPT

CERTIFICATION: FCC

COMPLIANCE: CE, CRN, RoHS