📞 +1 877-742-2878
emotron m20 power monitor
The Emotron M20 is characterized by its unique shaft power monitoring, quick enter settings, high accuracy with scalable output signal, low-cost installation, and zero maintenance. This product can immediately detect over and underload, caused by the pump becoming dry or a crusher jamming. High accuracy is offered even with small load variations, including an output signal to scale your machine's load. The M20 includes an auto-set feature that allows four protection set points to be established in three seconds. This product is all in one, using the motor as a sensor and therefore eliminating the need for external sensors and cables, in turn increasing reliability and reducing investment, installation, and maintenance costs.
m20 standard features:
- Advanced multi-function monitoring
- Two output relays
- Analog output and a display for load indication and parameter settings
- Rated power 7.5 – 1,600 kW
- Supply voltage 200 – 690 V, 3-phase
- Rated current 17 – 1,650 A
- Protection class
- IP20, NEMA 1 (up to 960 A)
- IP00, NEMA 0 (up to 1,650 A)
- Approvals CE, UL
m20 specifications
MOUNTING: | 35mm DIN rail 46277 |
WEIGHT: | 0.30 kg (10.5 oz) |
SUPPLY VOLTAGE (+-10%): | 1x100-240 VAC, 3x100-240 VAC, 3x380-500 VAC, 3x525 -690 VAC |
FREQUENCY: | 50 or 60 Hz |
POWER CONSUMPTION: | Max. 6 VA |
START-UP DELAY: | 1-999 s |
RELAY OUTPUT: | 5 A/240 VAC Resistive, 1.5 A/240 VAC pilot duty / AC12 |
ANALOGUE OUTPUT: | Max. load 500 ohm |
FUSE: | Max. 10A |
